Breadboards & IC Sockets

Create unlimited arrays by just snapping on another module.

• Each module has 400-holes for experimentation and circuit design.
• The comfortable color was chosen to avoid eye fatigue.

Build your own PC board.

• This 2-Sided Copper-Clad PC Board is ready to be etched and drilled.
• Dimensions: 4 1/2 x 6 3/8" (114 x 161mm)
• Thickness 1.6mm

• Use this grid-style PC board as the starting point for your electronics project.
• Includes 750 solder-ringed holes.
• Dimension are 2-3/4x3-1/16".

• Two sets of 100 indexed, pre-drilled plug-in points make it easy to connect and switch out components.
• This dual general-purpose IC PC board accepts two 6 to 20-pin ICs and DIPs.
• Provides four tie points for each IC pin.
• Dimensions are 1-3/4" x 3-5/8" (44.4 x 92.1mm).
• Accepts components with leads having a diameter of 0.01-0.0333" (0.25-0.84mm); 0.015-0.032" (0.38-0.81mm).
• 22-gauge wire recommended.
  
  

Instructions:

1. Insert ICs, transistors and other components from the top (unetched) side of the board.
2. Once you are sure that each part is properly positioned and oriented, solder it to the foil side of the board.
3. Ordinary hookup wire or bus wire can be used as jumpers to interconnect foil traces. Insert wire from the component side, then solder on the foil side.

Use this grid-style PC board as the starting point for your electronics project.

• Includes 417 pre-drilled holes with various bridged points for quick soldering connections.
• Features two power distribution soldering rails
• Standardized perforation gaps (2.5mm) between each soldering point
• Board dimensions are 1.875 inches (47mm) by 2.875 inches (72mm).
• UPC: 040293132798

Use this matching printed circuit board as the starting point for your electronics project.

• Includes 550+2(one on each side) pre-drilled indexed connect points.
• Layout matches modular breadboards for easy circuit transfer.
• Dimensions are 152.4mm ±0.5 x 52.37mm ±0.5.

Use this universal component PC board as the starting point for your electronics project.

• Includes 780 pre-drilled indexed holes.
• For ICs and DIPs up to 40 pins.
• Dimension are 2-13/16x3-3/4".
• Recommended 22AWG