Reading the Meter
For AA, AAA, AAAA, C, D, and 9V batteries, read the upper scale.
For 1.5V button batteries, read the lower scale.
Red: Replace Battery
Yellow: Low Power - Replace Soon
Green: Good
If the needle does not move, ensure the battery is touching both contacts before assuming that it is completely dead.
Note: The battery tester is powered by the battery being tested. Keep test times as short as possible to avoid unnecessary battery drain. Battery shown in product photo not included.
Specifications | ||
Battery Voltage | 1.5V | 9V |
Nominal Load | 4Ω | 215Ω |
Good/Low Threshold | 1.0V | 6.5V |
Low/Replace Threshold | 0.9V | 5.3V |
Max. Current | 375mA | 40mA |
Perfect for the hobbyist, this switch works great in any project or as a replacement switch.
Replaces: CR2354, CR 2354, CR-2354EL, DL2354, ECR2354
Power your devices and projects with our reliable CR2354 battery.
Used in remote controls, medical devices, fitness sensors, calculators, keyless entry systems, LED lights, motherboards, and many other electronics.
And it's a great battery to incorporate into your compact low-current projects.
Part Number | 2302781 |
Nominal Voltage | 3V |
Nominal Capacity | 560 mAh |
Standard Discharge Current | 0.2 mA |
Operating Temperature | -30 °C to +60 °C |
Weight | 5.8 g |
Diameter | 23.0 mm |
Height | 5.4 mm |
Shelf Life | 10 years |
UPC | 040293286095 |
⚠️ WARNING: Keep out of reach of children. If swallowed, call 800-498-8666 and seek medical attention immediately. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within two hours of ingestion. Keep in original package until ready to use. Dispose of used batteries promptly. Risk of injury due to fire, explosion or leakage. Do not disassemble, charge, crush or expose to fire or high temperatures.
Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
IMPORTANT: Lithium coin cell batteries are not interchangeable. Both the diameter and thickness can vary based on the cell designation. While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size. We recommend that you use the correct cell designation specified by the manufacturer of your device or identified in the cross reference list provided above.
NOTE: This product is packaged in child resistant packaging.
Create unlimited arrays by just snapping on another module.
Replaces: CR3032, CR 3032, CR3020, CR 3020, DL3032, BR3032, KL3032, L3032, ECR3032, KCR3032, E-CR3032, KECR3032
Power your devices and projects with our reliable CR3032 battery.
This specialty battery is used in remote controls, medical devices, monitors, dive computers, motherboards, vintage laptop computers (as a CMOS battery), and many other electronics.
And it's a great battery to incorporate into your compact low-current projects.
Part Number | 2302792 |
Nominal Voltage | 3V |
Nominal Capacity | 500 mAh |
Standard Discharge Current | 0.2 mA |
Operating Temperature | -30 °C to +60 °C |
Weight | 6.8 g |
Diameter | 30.0 mm |
Height | 3.2 mm |
Shelf Life | 10 years |
UPC | 040293868758 |
⚠️ WARNING: Keep out of reach of children. If swallowed, call 800-498-8666 and seek medical attention immediately. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within two hours of ingestion. Keep in original package until ready to use. Dispose of used batteries promptly. Risk of injury due to fire, explosion or leakage. Do not disassemble, charge, crush or expose to fire or high temperatures.
Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
IMPORTANT: Lithium coin cell batteries are not interchangeable. Both the diameter and thickness can vary based on the cell designation. While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size. We recommend that you use the correct cell designation specified by the manufacturer of your device or identified in the cross reference list provided above.
NOTE: This product is packaged in child resistant packaging.
Also fits Hakko 900M, 900M ESD, 907, 907-ESD, 933.
Dimensions 1.61x0.26x0.26
WARNING: This product, when used for soldering and similar applications, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm).
Parts Warranty: 90 Days
Part Number | 2760147 |
Dimensions | 160mm x 115mm |
Mounting Point Dimensions | 152mm x 107mm |
Soldering Points | 2200 |
Recommended Wire Gauge | 22AWG |
Perforated Array | 55x40 |
UPC | 040293132767 |
Use these gold-plated F couplers to connect two cables with type F-81BGD connectors.