Rosin Soldering Flux, Non-Spill Paste - 2 oz.
This electronic-quality rosin soldering flux is mixed with petroleum jelly paste and ideal for electrical and electronic soldering applications. Can be removed by wiping with a cloth or with cleaning solvent.
Instructions: Clean surfaces to be soldered. Remove dirt, paint, rust or insulation by scraping with a wire brush, filing or sanding. Apply a small amount of flux to surfaces to be soldered. Heat parts, melting flux, and apply solder until the solder flows readily. Allow to cool and then wipe clean.
Contents: WW Gum Rosin CAS# 8050-09-7, Diethylene Glycol Dibutyl CAS# 112-73-2, Dymerex Rosin CAS# 65997-05-9.
Safety Data Sheet
⚠️ WARNING: This product, when used for soldering and similar applications, can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
EYE AND SKIN IRRITANT. KEEP OUT OF REACH OF CHILDREN. Do not breath fumes; may cause dizziness, headaches, irritation, or allergic reaction. Use only with adequate ventilation. Use safety approved respiratory protection when necessary. Wash hands thoroughly with soap and water after use. Do not use in fabrication or repair of potable water service systems. For medical emergencies, call Poison Control at (800) 222-1222.
Do not dispose of together with household garbage. Do not allow product to reach sewage system. Dispose of properly.