• RadioShack
  • Linens N' Things
  • Pier 1
  • Dressbarn
  • Farmers Cart
  • Franklin Mint
  • Modells
  • Mentorbox

Solder & Flux

... Products Found
In stock

RadioShack SnCu 99.3/0.7 Lead-Free Rosin-Core Solder

Here's the perfect solder for hobby, project or repair jobs. It's lead-free so it's environmentally friendly and safe. This alloy has a melting point of 227°C.

 

$12.99 IN STOCK

RadioShack SnCuAg 95.5/0.5/4 Silver-Bearing Lead-Free Rosin-Core Solder, 0.062" Diameter - 0.5 oz.

This high-strength, lead-free solder with a high-silver tin/silver/copper alloy is great for repairing joints on printed circuit boards in computers, audio/video equipment, radios and more. Creates a strong, lead-free solder joint. The silver content minimizes solubility of silver coatings.

The high-activity, fully-activated flux creates more reliable soldering and leaves bright shiny solder joints after reflow. If additional flux is needed, our 6400022 rosin soldering flux is recommended.

Rosin activated flux will leave slight to moderate post-process residues. These residues may be left on noncritical applications, but should be cleaned and removed from any critical or military-grade applications. It is recommended to perform any post-process cleaning within a two to three hour period at a temperature of around 100°F.

This flux cored solder wire meets QQS-571E specification and applicable IPC-J-STD-004 and IPC-J-STD-006 requirements.

Part No. 6400026
Diameter 0.062" (1.575mm)
Weight 0.5 oz. (14.7g)
Alloy Sn95.5/Cu0.5/Ag4 (SAC405)
95.5% Tin, 0.5% Copper, 4% Silver
Melting Point Approx. 218°C
Approx. 424.4°F
Flux Core 2.0% RA (Rosin Activated)
IPC Flux Classification ROM1
Flux Shelf Life 7 Years (Stored < 85°F)
UPC 040293142803


Safety Data Sheet


 

WARNING: KEEP OUT OF REACH OF CHILDREN. Do not breathe fumes. Use only with adequate ventilation. Wash hands after use. Do not use in fabrication or repair of potable water systems. FIRST AID: INHALATION: Move to fresh air. SKIN IRRITATION: Wash with soap and water. EYE IRRITATION: Rinse eyes with water. INGESTION: Call Poison Control at 800-222-1222. FOR EMERGENCIES OR IF SYMPTOMS PERSIST: Seek immediate medical advice.

$8.99 IN STOCK

RadioShack SnPbAg 62/36/2 Silver-Bearing Rosin-Core Solder, 0.022" Diameter - 1.5 oz.

This easy-to-use, high-tech rosin core solder with a tin/lead/silver formula is ideal for soldering surface mount devices and other special applications. The silver content decreases the solubility of silver, making this alloy suitable for soldering silver-metallised surfaces, such as SMD capacitors and other silver-metallised ceramics.

The high-activity, fully-activated flux creates more reliable soldering and leaves bright shiny solder joints after reflow. If additional flux is needed, our 6400022 rosin soldering flux is recommended.

Rosin activated flux will leave slight to moderate post-process residues. These residues may be left on noncritical applications, but should be cleaned and removed from any critical or military-grade applications. It is recommended to perform any post-process cleaning within a two to three hour period at a temperature of around 100°F.

This flux cored solder wire meets QQS-571E specification and applicable IPC-J-STD-004 and IPC-J-STD-006 requirements.

Part No. 6400013
Diameter 0.022" (0.56mm)
Weight 1.5 oz. (42.5g)
Alloy Sn62/Pb36/Ag2
62% Tin, 36% Lead, 2% Silver
Melting Point 178°C - 190°C
352°F - 374°F
Flux Core 2.0% RA (Rosin Activated)
IPC Flux Classification ROM1
Flux Shelf Life 7 Years (Stored < 85°F)
UPC 040293141011


Safety Data Sheet



⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

KEEP OUT OF REACH OF CHILDREN. Do not breathe fumes. Use only with adequate ventilation. Wash hands after use. Do not use in fabrication or repair of potable water systems. FIRST AID: INHALATION: Move to fresh air. SKIN IRRITATION: Wash with soap and water. EYE IRRITATION: Rinse eyes with water. INGESTION: Call Poison Control at 800-222-1222. FOR EMERGENCIES OR IF SYMPTOMS PERSIST: Seek immediate medical advice.

$9.99 IN STOCK

RadioShack SnPbAg 62/36/2 Silver-Bearing Rosin-Core Solder, 0.015" Diameter - 1.0 oz.

This easy-to-use, high-tech rosin core solder with a tin/lead/silver formula is ideal for soldering surface mount devices and other special applications. The silver content decreases the solubility of silver, making this alloy suitable for soldering silver-metallised surfaces, such as SMD capacitors and other silver-metallised ceramics.

The high-activity, fully-activated flux creates more reliable soldering and leaves bright shiny solder joints after reflow. If additional flux is needed, our 6400022 rosin soldering flux is recommended.

Rosin activated flux will leave slight to moderate post-process residues. These residues may be left on noncritical applications, but should be cleaned and removed from any critical or military-grade applications. It is recommended to perform any post-process cleaning within a two to three hour period at a temperature of around 100°F.

This flux cored solder wire meets QQS-571E specification and applicable IPC-J-STD-004 and IPC-J-STD-006 requirements.

Part No. 6400035
Diameter 0.015" (0.39mm)
Weight 1.0 oz. (28.3g)
Alloy Sn62/Pb36/Ag2
62% Tin, 36% Lead, 2% Silver
Melting Point 178°C - 190°C
352°F - 374°F
Flux Core 2.0% RA (Rosin Activated)
IPC Flux Classification ROM1
Flux Shelf Life 7 Years (Stored < 85°F)
UPC 040293141035


Safety Data Sheet



⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

KEEP OUT OF REACH OF CHILDREN. Do not breathe fumes. Use only with adequate ventilation. Wash hands after use. Do not use in fabrication or repair of potable water systems. FIRST AID: INHALATION: Move to fresh air. SKIN IRRITATION: Wash with soap and water. EYE IRRITATION: Rinse eyes with water. INGESTION: Call Poison Control at 800-222-1222. FOR EMERGENCIES OR IF SYMPTOMS PERSIST: Seek immediate medical advice.

$9.99 IN STOCK

RadioShack SnCuAg 95.5/0.5/4 Silver-Bearing Lead-Free Rosin-Core Solder, 0.032" Diameter - 0.25 oz.

This high-strength, lead-free solder with a high-silver tin/silver/copper alloy is great for repairing joints on printed circuit boards in computers, audio/video equipment, radios and more. Creates a strong, lead-free solder joint. The silver content minimizes solubility of silver coatings.

The high-activity, fully-activated flux creates more reliable soldering and leaves bright shiny solder joints after reflow. If additional flux is needed, our 6400022 rosin soldering flux is recommended.

Rosin activated flux will leave slight to moderate post-process residues. These residues may be left on noncritical applications, but should be cleaned and removed from any critical or military-grade applications. It is recommended to perform any post-process cleaning within a two to three hour period at a temperature of around 100°F.

This flux cored solder wire meets QQS-571E specification and applicable IPC-J-STD-004 and IPC-J-STD-006 requirements.

Part No. 6400025
Diameter 0.032" (0.82mm)
Weight 0.25 oz. (7.08g)
Alloy Sn95.5/Cu0.5/Ag4 (SAC405)
95.5% Tin, 0.5% Copper, 4% Silver
Melting Point Approx. 218°C
Approx. 424.4°F
Flux Core 2.0% RA (Rosin Activated)
IPC Flux Classification ROM1
Flux Shelf Life 7 Years (Stored < 85°F)
UPC 040293142797


Safety Data Sheet



WARNING: KEEP OUT OF REACH OF CHILDREN. Do not breathe fumes. Use only with adequate ventilation. Wash hands after use. Do not use in fabrication or repair of potable water systems. FIRST AID: INHALATION: Move to fresh air. SKIN IRRITATION: Wash with soap and water. EYE IRRITATION: Rinse eyes with water. INGESTION: Call Poison Control at 800-222-1222. FOR EMERGENCIES OR IF SYMPTOMS PERSIST: Seek immediate medical advice.

$8.24 IN STOCK

RadioShack SnPb 63/37 Rosin-Core Solder, 0.050" Diameter - 1.5 oz.

  • This High-Tech Rosin Core Solder is ideal for soldering surface-mount devices.
  • A 63/37% formula of tin and lead, with a diameter of .050", 1.5 oz. spool.

Downloadable Content:

Parts Warranty: 90 Days
$7.99 IN STOCK

RadioShack SnPb 60/40 Rosin-Core Solder

Standard 60/40 high-purity formula for electronics work, soldering electrical components, and other general-purpose applications. Easy to use and suitable for home repairs and various soldering projects.

The high-activity, fully-activated flux creates more reliable soldering and leaves bright shiny solder joints after reflow. If additional flux is needed, our 6400022 rosin soldering flux is recommended.

Rosin activated flux will leave slight to moderate post-process residues. These residues may be left on noncritical applications, but should be cleaned and removed from any critical or military-grade applications. It is recommended to perform any post-process cleaning within a two to three hour period at a temperature of around 100°F.

This flux cored solder wire meets QQS-571E specification and applicable IPC-J-STD-004 and IPC-J-STD-006 requirements.

Alloy Sn60/Pb40
60% Tin, 40% Lead
Melting Point 183°C - 247°C
361°F - 477°F
Flux Core 2.0% RA (Rosin Activated)
IPC Flux Classification ROM1
Flux Shelf Life 7 Years (Stored < 85°F)


Safety Data Sheet



⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

KEEP OUT OF REACH OF CHILDREN. Do not breathe fumes. Use only with adequate ventilation. Wash hands after use. Do not use in fabrication or repair of potable water systems. FIRST AID: INHALATION: Move to fresh air. SKIN IRRITATION: Wash with soap and water. EYE IRRITATION: Rinse eyes with water. INGESTION: Call Poison Control at 800-222-1222. FOR EMERGENCIES OR IF SYMPTOMS PERSIST: Seek immediate medical advice.

from $7.49 IN STOCK

RadioShack SnPb 60/40 Clear-Flux Solder, 0.063" Diameter - 2.0 oz.

  • Standard 60/40 formula for electronics work
  • 0.063 diameter
  • 2.0 oz. spool

Downloadable Content:


$7.99 IN STOCK
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Browse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

You might also like