Make the repair or add switching to your DIY project with this 12VDC 10A DPDT relay.
Specifications
Part Number | 2750043 |
Compatible Part No. | Sanyou SME-212DT1 NTE R14-11D10-12 IDEC RH2B-UDC12V |
Nominal Switching Capacity | 10A 250VAC |
Coil Rated Voltage | 12VDC |
Coil Resistance | 160 Ohm (Typical) |
Contact Ratings | 10A 240VAC 10A 24VDC |
Number of Poles | 2-2 Poles |
Mounting Type | T-Socket |
Contact Form | Nil-Form C |
UPC | 040293971700 |
Parts Warranty: 90 Days
Insulated, tip-plated copper and brass terminals in several sizes, so you'll have the one you need on hand. Includes ring tongues, spade tongues, butt connectors and more.
Contains:
Female Quick-Disconnects – 6 ea. 16-14AWG Size 1/4"
Spade Tongues – 3 ea. 22-18AWG Size 6
Ring Tongues – 2 ea. 22-18AWG Size 6, 8, 10
Male Quick-Disconnects – 6 ea. 16-14AWG Size 1/4"
Spade Tongues – 3 ea. 22-18AWG Size 8
Ring Tongues – 2 ea. 16-14AWG Size 6, 8, 10
Wire Connectors – 2 ea. 22-18AWG / 1 ea. 12-10AWG
Spade Tongues – 6 ea. 16-14AWG Size 10
Ring Tongues – 6 ea. 16-14AWG Size 1/4"
Butt Connectors – 6 ea. 22-18AWG
Snap Male Connectors – 6 ea. 16-14AWG Size .156”
Ring Tongues – 4 ea. 12-10AWG Size 10
Butt Connectors – 6 ea. 16-14AWG
Snap Female Connectors – 4 ea. 16-14AWG Size .156”
Ring Tongues – 2 ea. 12-10AWG Size 1/4"
Butt Connectors – 4 ea. 12-10AWG
Quick Splice Connectors – 2 ea. 18-14AWG
Ring Tongues – 2 ea. 12-10AWG Size 3/8"
Instructions: When you need a terminal, slide the card out of the blister pack and remove the clear plastic retainer sheet. When you are ready to store the terminal, replaced the retainer sheet and slide the card back in place.
Parts Warranty: 90 Days
Part Number | 2740662 |
Dimensions | 50mm x 11mm |
Color | Black & Red |
Mounting Hole | 6.5mm x 8.2mm |
Metal | Nickel Plated Brass |
Socket Type | Banana Socket |
Cross Hole Size | 2.1mm |
Insulation Material | Nylon #6 |
Rating | 10A |
Insulation Resistance | DC 500V 100MΩ 1 Minute |
Dielectric Strength | AC 1000V 1 Minute |
Operation Temperature | -20°C - +80°C |
UPC | 040293115159 |
Make the repair or add switching to your DIY project with this 250V AC/10A DPDT Relay.
Also fits Hakko 900M, 900M ESD, 907, 907-ESD, 933.
Dimensions 1.61x0.26x0.26
WARNING: This product, when used for soldering and similar applications, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm).
Parts Warranty: 90 Days