Thank you for visiting RadioShack. If you need assistance with shopping on our site, please call us at 800-843-7422 and a customer care representative will be happy to assist you. Please inform the Customer Service representative that you require assistance.
SPST 12VDC/50mA 5.0mm High Tact Switch
Model:
275-002| Catalog #: 275-002
Free Ground Shipping on orders over $50.(Details)
You Might Also Want
Customer ReviewsREVIEW SNAPSHOT® by PowerReviewsRadioShackSPST 12VDC/50mA 5.0mm High Tact Switch (based on 10 reviews)  Ratings Distribution 86% of respondents would recommend this to a friend. Pros
Cons Best Uses
Reviewed by 10 customers Sort by Displaying reviews 1-10 Pros
Cons Best Uses Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: This is a tactile surface mount switch. those of you who say the legs are two short should realize that the switches are not meant for breadboards or through hole perferated boards.
 Pros
Cons Best Uses Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: Needs to specify whether this is a normally open or normally closed switch in the description and on the packaging......
Pros
Cons
Best Uses Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: The leads are too short for solderless breadboards, so don't bother using it for that. Broke one off trying to straighten it out.
Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: the leads are to short to do anthing with them  Pros
Cons
Best Uses
Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: Good switch. the leads are a bit short. Thery are for surface mounting but i made it work for my application.
Pros
Cons
Best Uses Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: Per the specs but the legs are a bit too short. Switch works perfectly Pros
Cons Best Uses Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: These switches are being used to control a portable illumination system. Their size makes them ideal for small, hand held control switch pads. In addition, the switches require quite a press in order to trigger them, thus reducing the chance of an accidental switch press. I'm really impressed with the quality of these switches. Note that you'll need a fine tipped soldering iron to solder the leads.
Pros
Cons
Best Uses Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: I put the switch in on the left click button of my dauther's laptop. It seems to be working fine. It was easy to install.
Pros
Cons Best Uses
Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: Replaced old switch for mixing. It seem to be more
Pros
Cons
Best Uses Comments about RadioShack SPST 12VDC/50mA 5.0mm High Tact Switch: Description says this is a SPST switch. Normally, these would hold their state. This is a MOMENTARY switch and cannot be used to turn devices on and off. We built boards assuming this switch was a non-momentary switch and then had to re-design because the information was lacking.
Displaying reviews 1-10 |
