Thank you for visiting RadioShack. If you need assistance with shopping on our site, please call us at 800-843-7422 and a customer care representative will be happy to assist you. Please inform the Customer Service representative that you require assistance.
No matter what project you're planning to build, we've got the supplies you need to make it happen, starting with the right single-board computer. Explore our selection of boards and microcontrollers below.
RASPBERRY PI KIT
Grab everything you need to start cooking with Raspberry Pi. Comes with a 512MB Raspberry Pi Model B, Adafruit Pi Cobbler Breakout Kit, MAKE Pi Enclosure, USB wall charger and USB...
Grab everything you need to start cooking with Raspberry Pi. Comes with a 512MB Raspberry Pi Model B, Adafruit Pi Cobbler Breakout Kit, MAKE: Pi Enclosure, USB wall charger and USB cable, 4GB Class 4 SDHC flash memory card, deluxe full-sized breadboard, Mintronics Survival Pack Guts, 1.5-foot HDMI cable, deluxe breadboard jumper wire, and Getting Started book.
Control your development destiny with BeagleBone, a credit card-sized, low-power, open-hardware computer. You can boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable. Includes BeagleBone Black Board, mini breadboard, deluxe jumper wire pack, survival pack guts and a guide that features excerpts from "Getting Started with BeagleBone" by Matt Richardson.
Meet the ultimate microcontroller project pack for DIY enthusiasts. This kit is ideal for everyone from beginners to experts, and particularly for those interested in working within the .Net environment. It includes a microcontroller and over 100 components hand-picked by the staff of Make: magazine, comprising motors, resistors, capacitors, LEDs, breadboards, potentiometer, jumper wires and much more.
Connects to the computer with a standard USB cable and contains the software capabilities you need to program and use the board. Capabilities can be extended with a variety of custom shields that highlight specific features.
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. It's compatible with most shields designed for the Arduino Duemilanove or Diecimila.
Operating Voltage: 5V
Input Voltage (recommended): 7–12V
Input Voltage (limits): 6–20V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40mA
DC Current for 3.3V Pin: 50mA
Flash Memory: 256kB of which 8kB used by bootloader
The power of Linux. The ease of use of Arduino. The Arduino Yún Microcontroller Board combines a classic Arduino Atmega32u4 Leonardo with a Wi-Fi system-on-a-chip running Linino, a customized version of OpenWRT, the most-used Linux distribution for embedded devices. Yún means "cloud" in Chinese, as the purpose of this board is to make it simple to connect to complex Web services directly from Arduino.
Packs all of the power of the Arduino Leonardo in a 1.9" x 0.7" (48mm x 18mm) size. Micro is best for when you want to shrink your project down or use it on a breadboard. Onboard is the processor, crystal, micro USB connection with fuse, ISP low-level reprogramming header, TX and RX LEDs, extra user pin #13 LED and a 3.3V regulator. Although it is not shield compatible, it does have all the same pins as an Arduino Leonardo.
Esplora differs from all Arduino boards in that it provides a built-in, ready-to-use set of onboard sensors, targeted for user interaction. It has everything needed to support the microcontroller; simply connect it to a computer with a USB cable and get started.
The Arduino Due is a microcontroller board with an Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. The Due has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), an 84MHz clock, a USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
Operating Voltage: 3.3V
Input Voltage (recommended): 7–12V
Input Voltage (limits): 6–16V
Digital I/O Pins: 54 (of which 12 provide PWM output)
Analog Input Pins: 12
Analog Outputs Pins: 2 (DAC)
Total DC Output Current on all I/O lines: 130mA
DC Current for 3.3V Pin: 800mA
DC Current for 5V Pin: 800mA
Flash Memory: 512kB all available for the user applications
All vital components (processor, clock source, memory, power regulator) are provided on the tiny PCB; just connect power and go! Great introductory microcontroller – ideal fit for applications that only need limited amounts of speed, I/O and memory.